воскресенье, 29 декабря 2019 г.

Tutorial 7 - Boss finishing with 5D surface strategy

Mill-turn tutorial #7 - Boss finishing with 5D surface strategy



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #finishing #5Dsurface

суббота, 28 декабря 2019 г.

Tutorial 6 - Rotary roughing with tool offset

Mill-turn tutorial #6 - Rotary roughing with tool offset



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #rotary #offset #tooloffset

пятница, 27 декабря 2019 г.

Tutorial 5 - Lathe hole machining

Mill-turn tutorial #5 - Lathe hole machining



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #lathe #latheod #roughing #roughinglathe


вторник, 24 декабря 2019 г.

Tutorial 4 - Lathe facing and OD roughing

Mill-turn tutorial #4 - Lathe facing and OD roughing



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #wcs #setup


понедельник, 23 декабря 2019 г.

Tutorial 3 - Workpiece definition and setup, WCS (origin) setup

Mill-turn tutorial #3 - Workpiece definition and setup, WCS (origin) setup



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #wcs #setup

воскресенье, 22 декабря 2019 г.

Tutorial 2 - Machine selection, model and tool list import

Mill-turn tutorial #2 - Machine selection, model and tool list import



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #import


пятница, 20 декабря 2019 г.

SEASON'S GREETINGS
We would like to take this as an opportunity to thank you for the trust in us and for the good cooperation.
The entire SprutCAM team wishes you a festive holiday season and a healthy and successful 2020! 🎁