воскресенье, 29 декабря 2019 г.

Tutorial 7 - Boss finishing with 5D surface strategy

Mill-turn tutorial #7 - Boss finishing with 5D surface strategy



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #finishing #5Dsurface

суббота, 28 декабря 2019 г.

Tutorial 6 - Rotary roughing with tool offset

Mill-turn tutorial #6 - Rotary roughing with tool offset



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #rotary #offset #tooloffset

пятница, 27 декабря 2019 г.

Tutorial 5 - Lathe hole machining

Mill-turn tutorial #5 - Lathe hole machining



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #lathe #latheod #roughing #roughinglathe


вторник, 24 декабря 2019 г.

Tutorial 4 - Lathe facing and OD roughing

Mill-turn tutorial #4 - Lathe facing and OD roughing



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #wcs #setup


понедельник, 23 декабря 2019 г.

Tutorial 3 - Workpiece definition and setup, WCS (origin) setup

Mill-turn tutorial #3 - Workpiece definition and setup, WCS (origin) setup



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #wcs #setup

воскресенье, 22 декабря 2019 г.

Tutorial 2 - Machine selection, model and tool list import

Mill-turn tutorial #2 - Machine selection, model and tool list import



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #import


пятница, 20 декабря 2019 г.

SEASON'S GREETINGS
We would like to take this as an opportunity to thank you for the trust in us and for the good cooperation.
The entire SprutCAM team wishes you a festive holiday season and a healthy and successful 2020! 🎁


четверг, 19 декабря 2019 г.

Tutorial 1 - Introduction to your first mill-turn project in SprutCAM

Mill-turn tutorial SprutCAM 12 - Introduction to your first mill-turn project in SprutCAM



In this tutorial we are machining a part on a mill-turn machine in CAD/CAM software SprutCAM 12.

This tutorial is for users which already have at least little experience in SprutCAM.



Playlist for mill-turn tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6H43WlwL3Fxz1r1b13Is61o





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #turnmill #millturn #gcode #lathe

среда, 18 декабря 2019 г.

Tutorial 25 - Full project simulation, g-code verification

Tutorial 25 - Full project simulation, g-code verification

Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #gcodeverify #simulation #gcode

вторник, 17 декабря 2019 г.

Tutorial 24 - Chamfering and Simulation

[3 axis milling tutorial SprutCAM 12] - 24 - {3rd setup} - Chamfering and Simulation



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #chamfering #simulation

понедельник, 16 декабря 2019 г.

Tutorial 23 - Undercut machining

[3 axis milling tutorial SprutCAM 12] - 23 - {3rd setup} - Undercut machining



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd







#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #undercut

воскресенье, 15 декабря 2019 г.

Tutorial 22 - Rounding machinig

[3 axis milling tutorial SprutCAM 12] - 22 - {3rd setup} - Rounding machinig



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes

четверг, 12 декабря 2019 г.

Tutorial 21 - Countersink machining

[3 axis milling tutorial SprutCAM 12] - 21 - {3rd setup} - Countersink machining



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd



#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #countersink

среда, 11 декабря 2019 г.

Tutorial 20 - Hole machining

[3 axis milling tutorial SprutCAM 12] - 20 - {3rd setup} - Hole machining



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #holemachining #drilling


вторник, 10 декабря 2019 г.

Tutorial 19 - Simulation and machining areas checkup

[3 axis milling tutorial SprutCAM 12] - 19 - {2nd setup} -Simulation and machining areas checkup



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd



#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #finishing #simulation

понедельник, 9 декабря 2019 г.

Tutorial 17 - Chamfers in the corners of the part

[3 axis milling tutorial SprutCAM 12] - 17 - {2nd setup} - Chamfers in the corners of the part



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #chamfer #finishing #chamfers

четверг, 5 декабря 2019 г.

Tutorial 16 - Grooves machining with 2D contour pt.2

[3 axis milling tutorial SprutCAM 12] - 16 - {2nd setup} - Groove machining with 2D contour pt.2



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd





#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #grooves #finishing #2Dcontour


SprutCAM - turn-mill tutorial for Mazak Integrex (1 of 5)

Tutorial for Mazak Integrex programming (1 of 5) for all the possibilities of SprutCAM for programming a turn-milling with 5 axes. In this first installment, it is shown how to place the imported part and generate the turning operations: facing, roughing, finishing and drilling.

среда, 4 декабря 2019 г.

Tutorial 15 - Grooves machining with 2D contour pt.1

[3 axis milling tutorial SprutCAM 12] - 15 - {2nd setup} - Grooves machining with 2D contour pt.1



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd




#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #grooves #finishing #2Dcontour

вторник, 3 декабря 2019 г.

Tutorial 14 - Adaptive roughing of open pockets

[3 axis milling tutorial SprutCAM 12] - 14 - {2nd setup} - Adaptive roughing of open pockets



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHL



#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #pocketing #finishing #adaptive #adaptiveroughing

понедельник, 2 декабря 2019 г.

Tutorial 13 - Pocketing with finish passes

[3 axis milling tutorial SprutCAM 12] - 13 - {2nd setup} - Pocketing with finish passes



Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd




#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #pocketing #finishing #finishpasses

воскресенье, 1 декабря 2019 г.

Tutorial 12 - Changing setup (part turnover)

[3 axis milling tutorial SprutCAM 12] - 12 - Changing setup (part turnover)

Playlist for 3-axis milling tutorial SprutCAM 12: https://www.youtube.com/playlist?list=PLHLSflSPTe6FVzInbJkwapnkMT5KyDInd



#tutorial #sprutcam #tutorials #sprutcamtutorial #milling #3axis #3axes #turnover

Friendly blogs